The formula
Volume of a box-shaped item is its length multiplied by its width multiplied by its height. For several identical items, multiply by the quantity. Add the rows together for the total.
volume = length × width × height × quantity
The only hard part is units. If you measure in centimetres, the answer comes out in cubic centimetres, and there are one million of those in a cubic metre. That is why the calculator converts everything for you.
| Measured in | To get cubic metres |
|---|---|
| Centimetres | (L × W × H) ÷ 1,000,000 |
| Millimetres | (L × W × H) ÷ 1,000,000,000 |
| Metres | L × W × H |
| Inches | (L × W × H) × 0.0000163871 |
| Feet | (L × W × H) × 0.0283168 |
One cubic metre is about 35.31 cubic feet and exactly 1,000 litres.
Worked example
You are moving ten medium boxes measuring 50 × 40 × 40 cm, a chest of drawers at 80 × 45 × 90 cm and a washing machine at 60 × 60 × 85 cm.
- Boxes: 50 × 40 × 40 = 80,000 cm³ each, so 0.08 m³. Ten of them make 0.8 m³.
- Chest of drawers: 80 × 45 × 90 = 324,000 cm³, or 0.324 m³.
- Washing machine: 60 × 60 × 85 = 306,000 cm³, or 0.306 m³.
The total is 1.43 m³, which is about 50.5 cubic feet or 1,430 litres. Those are the figures the calculator shows when the page first loads.
Why add a packing allowance?
Items never pack with zero gaps. Boxes of different sizes leave voids, furniture has awkward shapes, and you need room for blankets and straps. The packing allowance adds a percentage on top of the raw total so you plan for realistic space. Around 15 to 25% suits a load that is mostly boxes. A mixed household load with chairs, lamps and bikes can easily need 40% or more.
The bar chart then compares the space you need with typical load volumes for four example van sizes: about 3 m³ for a small van, 6 m³ for a short-wheelbase medium van, 11 m³ for a long-wheelbase high-roof van and 17 m³ for a Luton. These are rough illustrative figures, and real vans vary by model, so check the hire company's stated load volume.
When volume is the right number to use
Volume is useful for comparing van sizes, estimating how many trips you need, quoting removals and storage, and working out freight costs where the carrier charges by space. It is less useful on its own for a single bulky item, where the longest measurement and the door opening decide everything. Our guide to calculating cubic metres goes further into conversions and common mistakes.
Common mistakes
- Mixing units. Measuring one side in inches and another in centimetres gives nonsense. Pick one unit for the whole list.
- Dividing by 1,000 instead of 1,000,000. Going from cubic centimetres to cubic metres needs six zeros, not three. Dividing by 1,000 gives litres.
- Using the inside of a box. Always measure the outside, because that is the space it takes in the van.
- Forgetting odd shapes. A chair takes the space of the box it would sit in, not its "real" volume.
Frequently asked questions
How do I convert cubic metres to cubic feet?
Multiply by 35.315. So 2 m³ is about 70.6 ft³. To go the other way, divide cubic feet by 35.315.
How many litres are in a cubic metre?
Exactly 1,000 litres.
Can I use this for irregular items?
Measure the smallest rectangular box the item would fit inside. That is the space it really occupies when loaded.
Will the items fit if the volume is smaller than the van?
Not necessarily. Volume ignores shape, door openings and wheel arches. Check long or tall items with the Van Load Fit Calculator.