Furniture

How to measure furniture for a van

The measurements that matter, where people go wrong, and how to check the van door as well as the load space.

By Bilal Javed Published 5 min read

To measure furniture for a van, record the length, width and height of each item at its widest points, including legs, handles and packaging, then compare those numbers with the van's load space and its rear door opening. Most failed loads come from skipping the door or from measuring the neat body of an item instead of its full outline.

This guide walks through what to measure, in what order, and how to turn the numbers into a decision before you book anything.

What you need

A steel tape of at least 5 metres is ideal. A cloth sewing tape bends around cushions and gives short readings, and a phone measuring app is fine for a rough idea but not for a close call. You also want a notepad or your phone's notes app, and ideally a second person to hold the other end on long items.

The five measurements to take for every item

1. Length

The longest side, end to end. On a sofa that is arm to arm. On a bed base, head to foot. On a wardrobe lying down, top to bottom.

2. Width (or depth)

Front to back. Measure at the deepest point, which on a sofa is usually from the front of the seat cushion or arm to the back of the frame, including any back cushions that do not come off.

3. Height

Floor to the highest point. Include feet and castors unless you will take them off before loading.

4. Weight

You rarely know this exactly, but you need a sensible estimate for the payload. Manufacturer listings often state it. For appliances, check the model number online. For boxes, weigh a couple on bathroom scales and multiply.

5. Anything that comes off

Note which parts can be removed: sofa feet, table legs, wardrobe doors, bed headboards, mirror frames. Then decide whether you will actually remove them, and measure the item in the state it will travel.

Measure the widest points, not the main body

This is where most measurements go wrong. Furniture is rarely a perfect box. A chest of drawers has handles that stick out 3 cm. A wardrobe has a decorative top that overhangs the sides. A sofa has rolled arms that are wider at the top than at the base, and a recliner has a footrest mechanism that adds depth.

The van does not care about the main body. It only cares about the smallest box the whole item would fit inside. Put the tape across the outermost points every time, and round up to the next whole centimetre.

Measure the route out of the house

Getting furniture into the van starts at the room it is in. Before moving day, measure:

  • the narrowest doorway on the route, with the door open (the door itself takes a few centimetres);
  • hallway widths, especially where you need to turn a corner;
  • stair width, the ceiling height above the stairs, and any turn on a landing;
  • the front door and porch.

If an item came in, it can usually go out the same way, but not always. Many sofas and wardrobes are delivered flat-packed or in pieces and assembled in the room. For sofas, there is a specific technique called diagonal depth, which our guide on whether a sofa will fit in a small van explains.

Measure the van, including the doors

You need four sets of numbers from the van:

MeasurementWhere to take itWhy it matters
Load lengthFloor level, bulkhead to the inside of the closed rear doorsDecides the longest item
Width between wheel archesThe narrowest point across the floorWide flat items sit here
Load heightFloor to the roof, at the lowest pointTall items and stacking
Rear door openingClear width and height inside the frameEverything has to pass through it

Hire companies normally publish load length and volume, but not always the door opening or the width between the arches. Ask, or measure when you collect the van. If the side loading door is your plan B for an awkward item, measure that too. The guide to van loading door dimensions has more on why the opening is the number that catches people out.

Turn the numbers into a decision

Put the measurements for your biggest items into the Van Load Fit Calculator. It tests all six orientations of each item, checks the load space and the rear door, and tells you which way round it should go. Then add everything else to the Load Volume Calculator to see whether the total fits in one trip.

A good order of work is: biggest item first, total volume second, weight third. If the biggest item fails, nothing else matters until you have a bigger van or a plan to dismantle it.

Common mistakes to avoid

  • Trusting the listing. Online furniture listings sometimes give the seat width rather than the overall width, or omit the feet.
  • Forgetting the wrapping. Moving blankets and bubble wrap can add 2 to 4 cm to every side.
  • Measuring a van from the brochure only. Brochure load lengths are usually taken at floor level. If the bulkhead slopes forward, the length at shoulder height can be shorter.
  • Ignoring wheel arches. A 160 cm wide load floor might be only 120 to 130 cm between the arches.
  • Leaving no clearance. An item that fits with zero margin is very hard to load without damage.

Safety when handling large items

Heavy furniture and appliances cause back injuries and crushed fingers more often than anything else on moving day. Use two people for anything over about 25 kg or longer than you can comfortably reach around, wear gloves with grip, and plan where you will put the item down before you lift it. Appliances like fridge freezers should travel upright where possible. Once loaded, everything needs strapping to the van's tie-down points. DVSA's load-securing guidance covers vans as well as lorries, and is worth a read if you load vans regularly.

Frequently asked questions

Should I measure furniture with or without packaging?

With it, if it will travel wrapped or boxed. Moving blankets add a centimetre or two on every side, and cardboard corner protectors add more.

What is the most common measuring mistake?

Measuring the main body of an item and missing the parts that stick out: feet, handles, rolled arms, cornices on wardrobes and the plinth under a chest of drawers.

Do I need to measure the van as well?

Yes. You need the load length, the width between the wheel arches, the load height and the rear door opening. Hire companies usually publish these, but measuring yourself removes any doubt.

How much clearance should I leave?

Aim for at least 5 cm on each measurement for furniture. That leaves room for your hands, blankets and straps.

Sources and further reading

About this guideWritten for LoadFit by Bilal Javed. We check facts against official sources such as GOV.UK and DVSA where rules are involved, and we update guides when those rules change. If something here is out of date or unclear, please let us know.